Some useful information on keeping your Echorec running well and sounding fantastic (if it sounded fantastic in the first place – most machines we receive are in need of extensive restoration to function safely and as they should…).
Binson Echorecs have a reputation for being difficult to own and care for. However, the reality is that regular maintenance of one is not difficult or time-consuming, and actually the most important thing you can do (beyond keeping the disc clean and lightly oiled – see below) is to USE IT regularly.
Read on for plenty to help you to be a responsible Echorec owner, plus you will find manuals and some other trouble-shooting information.
This page is a work in progress. So far below you will find:
For more general information about these machines and other useful links head to our main Binson Echorec page.
(Just a few to get you started – more coming soon!)
Tony’s going to add his own version here shortly, adapted from the original Binson manual.
You can download a full scan (14MB) of a Binson Echorec manual (however when you buy a Soundgas Binson we supply an amended version, tailored to your model and its modifications)
Video of the process from Marcello, designer of the modern “Special Binson”:
First thing to do – clean capstan and jockey wheel with a cloth moistened with isopropyl alcohol. If the jockey wheel surface is in a bad way acetone can be used to remove a thin layer of rubber and improve drum. Clean the lower section of the drum (where the jockey wheel makes contact) with liquid lighter fluid (naptha/petroleum ether) if excess oil is causing the jockey wheel to slip resulting in poor drive.
If that doesn’t cure it, carefully/slightly slacken off the screw below and apply a little extra pressure to move the silver piece (may also be a spring type assembly) towards the capstan, then re-tighten screw.
Do not force it or leave jockey wheel tightly up against capstan (it should not cause the jockey wheel to compress): this can wear motor and leave a dent in the jockey wheel, which when left unused for a time which will cause an audible warble. We’re talking a slight adjustment to make the wheel engage more readily. It’s worth leaving the cover off for a few days while to see if you’ve got it right.
Some extra information for owners of one of our varispeed modified machines – you can find out more about this mod here.
Cleaning – extra notes:
Read the cleaning instructions above! Regular cleaning is essential – a little and often best. I find it’s best to apply a drop of oil to your finger tip (or a cotton bud) and use that to apply to the disc while rotating (make sure your hands are clean first!). Excess oil will cause more noise – this will be exacerbated in varispeed machines where you can get the disc to spin much faster than normal. If the disc starts squeaking or squealing, it’s probably too much oil (remove with a cotton pad or bud).
Operation:
These machines can take time to warm up. During the first few minutes of use, you may get crazier modulation on repeats (or less repeats), which can be good. If the machine’s not been used for some time, you may need to remove the plexiglass cover and help the disc get started: Binsons need regular use to stay on top form.
On “standard” design T7E-type Binsons the varispeed control knob is found on the same side as the inputs/outputs – be careful to protect it when the machine is in transit. This is a simple variable speed motor control so the bias will change and noise/fidelity increases/decreases – and the number of repeats/ease of self-oscillation – depending on the speed selection.
======
Any problems or questions about your Soundgas Binson please get in touch now and we will help.
Didn’t buy your Binson from us? Still get in touch, but be aware that our customers have priority access to our time and tech department.
We are Binson specialists and this page is the centre of our Echorec world. Enter for machines for sale, Binson history, links to demos & other...
If a standard Echorec was considered adequate for Barrett, Gilmour, and Page, why would you modify a vintage Echorec with a variable speed motor?
Some of our favourite videos (mostly our own!) of Echorecs in action. Includes demos featuring guitar, synths & drum machines, as well as some super-slow modified...
Original Binson Echorecs are the classic Ferrari of electro-mechanical delays. They’re rare, expensive, require specialist restoration and servicing, parts are scarce, and they need to be...
A brief guide and a few personal thoughts on some Echorec models we've had in recently, including T5E, Baby, B1/B2, T7E, PE603-T, EC 3 and some...
For the Apollo 11 score Matt Morton embarked on a mission to compose using only instruments available in 1969 - a neat excuse to buy a...
We stand behind our gear with a guarantee of your satisfaction - see the FAQ section above for full details and buy with complete confidence.
When buying more than one item you only pay the shipping on the item with the highest shipping cost. Calculated automatically at checkout.
Get in touch via the contact page. We know & love our gear and we want to ensure you get something that matches your needs (that, and we just like talking gear).