Product Description
Near mint Space Echo, complete with original cover and footswitch.
EARLY PREAMPS? We have modified this to have similar preamp spec as the very early Space Echoes. These clip more evenly and more musically. They also do so at a lower signal strength which gives a little more control; they sound particularly good with guitar. We only do this to machines that are performing extremely well; in particular it is essential that the heads are at peak performance in order to get the full benefit of the modification.
This machine has been given our “standard” full overhaul which, in addition to the basic service, recapping and set up, includes:
Every machine is also tested by a musician (test equipment: their ears!) before shipping. Every one supplied with 12 months warranty and ongoing service support.
Note that we may have machines in a range of conditions (and prices) coming through – check our other listings or get in touch if this unit here isn’t the right one for you.
REPLACEMENT TAPES: Fitting any tapes other than those from us or Echo Fix will invalidate the warranty on our machines. We have sourced unused and dry-stored tape stock which is as close to original RT-1L tape formulation as possible (without conclusive confirmation from Roland themselves we cannot describe it as being an exact match) for their original RT-1L replacement loops and limited stocks of our replacement loops are available now. We’ve written a bit about our journeys in tape, which replacement loops to use in your Roland echo, not to mention the misinformation and poor quality tapes that seem to fill the internet. We may also have a very limited supply of sealed original NOS RT1-L tapes – see our store or get in touch.
There are currently no operational issues with this machine, but please be aware that these units require looking after and that regular use and maintenance are key to keeping this in good working order.
EARLY PREAMPS? We have modified this to have similar preamp spec as the very early Space Echoes. These clip more evenly and more musically. They also do so at a lower signal strength which gives a little more control; they sound particularly good with guitar. We only do this to machines that are performing extremely well; in particular it is essential that the heads are at peak performance in order to get the full benefit of the modification.
This machine has been given our “standard” full overhaul which, in addition to the basic service, recapping and set up, includes:
- One of our new tapes
- One of our pinch rollers (an original pinch roller with a new bearing and new rubber; time consuming to produce, but only the best will give the best long term performance)
- Heads re-lapped and aligned to bring performance beyond Roland factory spec. They are now more even and run at low head make-up gain so you have the maximum amount of headroom available.
- Serviced or rebuilt motor as required.
- Switchable voltage transformer installed (120/240v)
Every machine is also tested by a musician (test equipment: their ears!) before shipping. Every one supplied with 12 months warranty and ongoing service support.
Note that we may have machines in a range of conditions (and prices) coming through – check our other listings or get in touch if this unit here isn’t the right one for you.
REPLACEMENT TAPES: Fitting any tapes other than those from us or Echo Fix will invalidate the warranty on our machines. We have sourced unused and dry-stored tape stock which is as close to original RT-1L tape formulation as possible (without conclusive confirmation from Roland themselves we cannot describe it as being an exact match) for their original RT-1L replacement loops and limited stocks of our replacement loops are available now. We’ve written a bit about our journeys in tape, which replacement loops to use in your Roland echo, not to mention the misinformation and poor quality tapes that seem to fill the internet. We may also have a very limited supply of sealed original NOS RT1-L tapes – see our store or get in touch.
There are currently no operational issues with this machine, but please be aware that these units require looking after and that regular use and maintenance are key to keeping this in good working order.