In stock now! We saw these and just had to have a few for our set up. We'll be adding our own demos and experiments with this beautifully designed and build box soon. The Transmutron provides unique ways to create and dynamically control combinations of effects, while integrating pedals and eurorack modular....Read more
- £245.00 ex VAT (£294.00 inc VAT )
Dual FX Loop Crossover Filter
*Brand new stock*
We saw these and just had to have a few for our set up. All the info below is culled from Boredbrain's site. We'll be adding our own demos and experiments with this beautifully designed and build box soon. For now here is all the stuff from the designers.
The Transmutron provides unique ways to create and dynamically control combinations of effects, while integrating pedals and eurorack modular.
- Split signal into two frequency bands
- Process with pedals, eurorack and other effects
- Crossover, crossfader and resonant notch modes
- Control splitpoint with CV and expression pedal
- Select between 12, 24 or 48 db/oct filter slopes
- Limit bandwidths with hi & low cut filters
More info below; here are Boredbrain's videos explaining the features and demoing the unit:
From Boredbrain's site:
Are your effects chains suffering from radioactive decay? The Transmutron allows you to combine pedals (and eurorack effects) within its sonic reactor to create new and exciting compounds! Different results can be achieved using one of three modes: Fission (crossover filter), Fusion (crossfader), and Fallout (resonant wide-notch filter).
In the primary mode, Fission, the signal from your guitar, bass, synth, or drum machine is split into separate frequency bands, sent simultaneously to different effects, and then recombined to a single output (or two separate outputs). The Splitpoint parameter can be controlled manually or with an expression pedal, and simultaneously injected with a control voltage (CV) source for extremely dynamic reactions!
In Fusion mode, the Splitpoint instead acts as a pre-FX level crossfader, rather than splitting the signal into separate bands. This allows for less extreme blends, especially when modulating. In the third mode, Fallout, a resonant wide-notch filter is applied to both pre-FX channel signals, cutting a hole and creating a phasing-wah effect when using an expression pedal or LFO to sweep the Splitpoint back and forth.
To further shape the signals sent to your effects, the Transmutron is equipped with dedicated hi and low cut filters. In Fission and Fallout modes, the cutoff frequencies of these filters also define the end-to-end sweepable range of the Splitpoint parameter and its center frequency. The filters have selectable slopes of 12, 24, or 48 db/oct, which also affects the crossover filter, and greatly enhances the resonance of the wide-notch filter. If further separation of the parallel FX channels is needed, a dedicated phase switch is on-hand.
Both FX channels have two sets of sends and returns: 1/4-in for guitar pedals and line-level effects, and 3.5mm for eurorack level processing. For each channel, the 1/4-in and 3.5mm FX loops can be used simultaneously, as they are in series (3.5mm then 1/4-in). The FX sends are half-normalled so they can be used as buffered copies without affecting the returns. Additionally, the 3.5mm FX loops for each channel can be independently switched to pedal/line-level using internal dip switches, which allows for seamless integration with the Boredbrain Patchulator 8000.
How complex the reaction is up to you! From simple tone shaping using only a couple effects, to interconnected combinations of pedals and eurorack modulation madness, the Transmutron is just the tool you need to reactivate your effects!
- +10dB pre-FX gain per channel
- Mix output or individual output of each FX channel
- Solo cycle footswitch for channel isolation
- Phase inversion switch to reduce phasing and enhance stereo output
- Half-normalled FX sends for buffered copies
- 3.5mm FX loops switchable between pedal and eurorack levels
Some of our gear will have VAT at 20% added in the UK/EU, but a lot of it won't. This should hopefully clarify the situation but if you have any questions then please get in touch.
ITEMS WITH VAT:
- These items will have two prices visible: with and without the tax.
- If you are buying in the UK/EU you will receive an invoice showing the tax component.
- If you are buying these items outside the EU when you get to the check out and enter your shipping location you will be charged the ex-VAT price.
- VAT-free sales are also possible to businesses within the EU with a valid VAT number. You will need to contact us in order to buy via this means.
ITEMS WITHOUT VAT:
- Much of what we sell is classified as "Second Hand Goods" and so while we still pay some tax, there is no recoverable/deductible component for sales to any part of the world.
- So, the price you see is the price you pay wherever you are.
- Shipping charges are also subject to VAT at 20% within the UK/EU - this is included within the prices you see for shipping to those areas - it is not shown separately in the cart but will be shown on the VAT invoice you receive with your goods.
We are very experienced at packing and shipping valuable and sensitive gear worldwide. Binson Echorecs, large valve amps, vintage synths, rare racks, and even a CS-80 or two - you name it, we've sent it and it has arrived in one piece and ready to play.
SHIPPING DISCOUNT ON MULTIPLE ITEMS:
We keep it simple: if you buy more than one item you only pay the shipping on the item that has the highest shipping cost. This is the same no matter how many items you buy together (so the more you buy together, the bigger your shipping discount). If you check all the items out all together this will be calculated automatically at checkout. However, if you make an order and then wish to add to it before it ships please get in touch and we will refund the shipping on the item(s) that are cheaper to ship.
CAN I COLLECT MY GEAR (and save on shipping?)
Yes! If you want to use this option either get in touch before you purchase, or contact us afterwards and we will just refund you the shipping. Note that collection is by appointment only and only during weekday office hours.
MORE SHIPPING INFO:
The shipping prices for our gear vary considerably depending on the type of gear, value and destination. To see shipping costs put the item you are interested in the cart and then either use the shipping estimator or go into the check out process. Or just contact us and we'll tell you what you need to know.
It is a fact that, with vintage items, there are going to be times when gear arrives in need of some adjustment or calibration, and some times a piece of gear that was working 100% just chooses the day after arriving for a new fault to develop. However, having been working with sensitive vintage gear for many years, we are very experienced at dealing with these occurrences and will always work with you and get the problem solved as quickly and painlessly as possible.
Note that we have have not entered automatic shipping for every country. The countries we ship to most often will have shipping rates and we are in the process of adding more shipping fees to the check out process. But if you are looking at an item that doesn't have the fee information you need then please use the contact page or call on +44 1773 856475.
Which carriers do we use?
We usually use Royal Mail, UPS and DPD/Interlink - it depends on the item and destination as to which is the most economical. If you have a preference then we should be able to accommodate it (but we may need to pass on any additional costs) - just let us know what you need.
We Also Recommend